Installation and daily maintenance for MOP Peel and Stick Mosaic

Installation and daily maintenance for MOP Peel and Stick Mosaic

You may need tools below.

1. Prepare the tools you may need, such as a pencil, sponge or soft duster,grinder, scissors, knife, measuring tape.

2. Please check all the mosaic sheets before starting the installation, and make sure all the sheets are in good condition.

3. Check the wall surface and make sure the wall is dry, clean, flat, smooth, and no dust, oil and other dirtness.

4. Check the area and size for installation. Use a grinder if you have to cut the shell mosaic chips to parts, but you can  use knife or scissors if you only need to cut it through the gap.

5. Wear a safety equipment to protect yourself, such as glasses, gloves or others.

6. Please make sure the tile alignment is correct before applying any pressure. Then put the tile in the desired position. Peel off a small part of the backing and stick to the wall lightly.

7. Apply pressure evenly to the whole surface of the tile, making sure to remove the backing in the process. Repeat this work until you cover all the desired wall.

8. Use a wet sponge or soft duster to clean the whole tile surface for daily maintenance.